|
|
|
Kenplas Forum ==> Injection Molding (Machine) ==> 5 gallon PET preforms specs
|
|
|
|
|
| 1 |
Hi all :
I would appreciate your help to know the specs of the 1 Gallon & 5 gallon PET preforms, related with weight variation, eccentricity, thickness variation..etc
Will appreciate them in conformity of Nestle standards too
Many thanks in advance
Arshed Iqbal
|
Dear Sirs,
I work in a newly started company and I came up with a problem when producing 750 g preform. ( 5 gallon). No matter how I change the machine settings The preform is not transparent. When preform is cut there is clearly 3 layers. one whitish in the middle and 2 adjoining it are clear as we want. please tell me why this and how can I prevent this. my machine settings are attached below.
|
Hi all :
I would appreciate your help to know the specs of the 5 gallon PET preforms, related with weight variation, eccentricity, thickness variation..etc
Many thanks in advance
Bert
|
| 1 |
|
|
|
|
|
|
This forum published since July 03, 2002.
Renewed on June 22, 2005. |
Discussion Forum