|
Kenplas Forum ==> Injection Molding (Machine) ==> preform damage when opening mould
|
|
|
1 |
hi asantha
you can decrease milky partin 750 gms prefrom very easy. first of all make sure that temp. of zone 2,3,&4 are uniformly equal and unique. second is your chilling pressure should be more than 5 bar, hr temp should be more than 275. you can contact me on wwww.mdpetcontainers.com
|
750 g preform milky on the middle part. why this happening & how I should correct the problem.
|
what are the reasons for damaging preform when opening mould?
|
1 |
|
|
|
This forum published since July 03, 2002.
Renewed on June 22, 2005. |