|
|
|
Kenplas Forum ==> Used Machinery & Mold ==> drilling out a dead cartridge heater
|
|
|
|
|
| 1 |
I am running a Hot runner mold and one of the heating cartridges such as...
http://www.watlow.com/products/heaters/ht_cart.cfm
...have burned out and needs to be replaced, I have replaced several on this mold before, but it always takes a few bits, and a lot of hammering.
simpply it costs a lot of time and money.
is there a known way to extract a dead cartridge heater?
Thank you.
the heaters, are metal casings filled with a ceramic compund, in a steel mold.
|
| 1 |
|
|
|
|
|
|
This forum published since July 03, 2002.
Renewed on June 22, 2005. |
Discussion Forum