|
|
|
Kenplas Forum ==> Others ==> Slitter QK-15 Problem
|
|
|
|
|
| 1 |
|
Check if there is a breach on slitting knife. As the machine trial before delivery shows this problem did not exisit.
|
|
We ran the slitter machine and found out that the knifes seem to be short since we cannot cut 360 degrees, leaving a small un-cut gap, provoking an extra post (see attached). We also feel that current posts are very thick and hard to brake.
|
| 1 |
|
|
|
|
|
|
This forum published since July 03, 2002.
Renewed on June 22, 2005. |
Discussion Forum