Visitor No.2910445 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Injection Molding (Machine) ==> variability from cavity to cavity
<< Previous Topic Next Topic >>
1
Please send me a quotation of a PET preforms- bottles manufacturing machinery and all required accessories (oNE-STEP "HOT" PREFORM production line)

Fine
Poor
2014-11-24 16:36:42 By eugene selengia
Hi You need to check the gate size probably is to small, or go to cavity balance trial and compare the weight of all 4 cavities when they shorting with out holding pressure about 80 to 90 procent fill and then study your gate sizes

Fine
1
Poor
2014-1-28 1:43:50 By maciek
We are making a circular part in a 4 cavity mold. The sample dimensions (i.e. radius) that we get from one of the cavities is smaller than the other 3 cavities and this is causing some issues. Anyone knows what could be causing the short radius in only one of the cavities? Thank you.

Fine
Poor
2013-12-19 4:58:06 By sade
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:



Message:

(Max. 2KB)





Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2024 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.