MOLD-OPEN or NOZZLE-RET while production (KPET12), Machine Trouble Shooting

Kenplas Forum ==> Machine Trouble Shooting ==> MOLD-OPEN or NOZZLE-RET while production (KPET12)

MOLD-OPEN or NOZZLE-RET while production, 80% caused by relavent valve (the space/clearance between valve core and valve body is too much).

As we think, this machine was used at least 2 years, or long time no changing hydraulic oil, or machine running long time while oil temperature is over 55c.

2007-12-27 12:46:28 By Kenplas

MOLD OPENING ERRATICALLY WHILE PRODUCTION ONE A WHILE .
SOME TIME THS HAPPENS ON THE SCREW SIDE ALSO THE CARRIAGE GOES BACK .
PLEASE LET ME KNOW YOUR COMMENTS
PLEASE ADVICE AS I AM HERE AT A CUSTOMER PLACE MATTER VEREY VERY URGENT , as nikita has not been able to solve all these issues see what best we can do to support them. Now.

REGARDS

MANNOJ KV

2007-12-27 12:44:21 By Mannoj


*Post A Reply*
	Temporarily shut down, no new message, sorry.
Name:	..Invalid Name..
Email:	..Invalid Email.. Send new posts of this topic to my email box.
Message:	(Max. 2KB)
Message:	..Invalid Message..
Attachment:	(Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:	..Invalid Code..

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project]	[Plastics Machinery]	[Plastics Mold]	[Discussion Forum]	[Contact Kenplas]
Copyright © 2024 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd. Powered by Alentus.