body and base side of white bottle, Blow Molding (Machine)

Kenplas Forum ==> Blow Molding (Machine) ==> body and base side of white bottle

low met in upper hetting lamp...
nack & body cooling tmp low
this also effect to pet material distribution
incres preblow pressure or prblow angle setting.

2015-3-6 23:47:40 By balakrishna b

Hi this can be caused by incorrect heating profile or incorrect pre-blow pressure.Try reducing pre-blow pressure and increase heat in zone 1 and 2.If the base is white and thin this should solve your problem.

2012-9-15 8:01:26 By wayde hmailton

HEAVY NECK WT. AND BODY& BASE AREA WHITE COLOUR APPEARS

2012-9-12 19:33:36 By pramod


*Post A Reply*
	Temporarily shut down, no new message, sorry.
Name:	..Invalid Name..
Email:	..Invalid Email.. Send new posts of this topic to my email box.
Message:	(Max. 2KB)
Message:	..Invalid Message..
Attachment:	(Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:	..Invalid Code..

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project]	[Plastics Machinery]	[Plastics Mold]	[Discussion Forum]	[Contact Kenplas]
Copyright © 2024 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd. Powered by Alentus.