Visitor No.2910441 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Injection Molding (Machine) ==> blobs in the bottles after preform is blown up.
<< Previous Topic Next Topic >>
1
The problem is due to unmelted pet granola ,causes:1-low melt temp ( increase injection melt temp ) 2-low stay of melt in the cylinder ( decrease injection cycle time ) 3- the injection machine is not suitable for pet production.

Fine
Poor
1
2015-2-18 0:22:44 By amirazodi
Hi. Not sure if anyone can help but having problems with blobs of plastic in the bottles after bottle is blown. It is coming from the preform and almost want to.call them unmelts but they are not bubbles. Just white blobs that you can barely see in preform but more prodominent when bottle is formed.

Fine
Poor
2015-2-11 23:27:46 By rachel
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:



Message:

(Max. 2KB)





Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2024 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.