|
|
|
Kenplas Forum ==> Blow Molding (Machine) ==> injection blow problem
|
|
|
|
|
| 1 |
|
Why PET Bottles from Injection Blow Process are more clear than PET Bottles from Injection Stretch Blow Process?
|
HiTom ,
First you mention the size (volume ) of bottle and on which machine you are producing it , see we are useing RELIANCE-F46003 For 15 ml bottle and the process is Injectoin Blow Molding machine.
|
Hi Tom
The type of HDPE you will use depends on the size of your container and the degree of inflation required. You would need a fairly high molecular weight material to give you the appropriate melt strength, however sounds to me like your problem is your process. Could be a simple question of playing with the various settings really.
|
|
can any one advise on best hdpe to use in injection blow moulding have tried several and found the surface finish of containers to be poor and exhibit a scaly effect anys sugestions appreciated
|
| 1 |
|
|
|
|
|
|
This forum published since July 03, 2002.
Renewed on June 22, 2005. |
Discussion Forum