Visitor No.2910773 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Blow Molding (Machine) ==> trouble shooting of pet bottles
<< Previous Topic Next Topic >>
1
My pet blow machine transfer arm is hanging, it will stop while moving. What could be the likely solution.

Fine
Poor
2013-12-10 18:33:17 By adewoyin sunday
It is possible that the storage temperature of preforms drop considerably overnight,

Fine
Poor
2013-6-7 21:56:14 By dave nicholas
sir,we are having a pet blowing machine.the temperature setting for the machine for pet preform is varied.means,if today is running the machine with the temperature as 480,465,458,346,250,224 the bottles are good.but tommorrow while we start the machine with the same temperature,we can not get the good bottles.what the reason for the problem.please send the corrective measure to apply the machine.
thank you,
with regards,
kareem,
chennai.

Fine
9
Poor
4
2012-3-3 17:38:46 By kareem
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:



Message:

(Max. 2KB)





Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2024 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.